spec no: dsap0944 rev no: v.1a date: mar/01/2017 page: 1 of 5 approved: wynec checked: allen liu drawn: w.q.zhong er p: 1203004347 3. 0mmx1.0 mm right angle smd chip led lamp part number: APPA3010SURCK hyper red features z 3.0x2.5x1.0mm right angle smd led, 1.0mm thickness. z low power consumption. z ideal for back light and indicator. z package : 2000pcs / reel. z moisture sensitivity level : level 3. z tinned pads for improved solderability. z rohs compliant. descriptions z the hyper red source color devices are made with al gainp on gaas substrate light emitting diode. z electrostatic discharge and power surge coul d damage the leds. z it is recommended to use a wrist band or anti- electrostatic gl ove when handling the leds. z all devices, equipment and machinery must be electri cally grounded. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.15(0.006") unless otherwise noted. 3. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice . 4. the device has a single mounting surface. the devi ce must be mounted according to the specifications. attention observe precautions for handling electrostatic discharge sensitive devices
spec no: dsap0944 rev no: v.1a date: mar/01/2017 page: 2 of 5 approved: wynec checked: allen liu drawn: w.q.zhong er p: 1203004347 selection guide part no. emitting color (material) lens type iv (mcd) [2] @ 20ma v iewing angle [1] min. typ. 2 1/2 APPA3010SURCK hyper red (algainp) water clear 500 800 *200 *300 30 absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c symbol parameter emitting color typ. max. units test conditions peak peak wavelength hyper red 645 nm i f =20ma d [1] dominant wavelength hyper red 630 nm i f =20ma ? 1/2 spectral line half-width hyper red 28 nm i f =20ma c capacitance hyper red 35 pf v f =0v;f=1mhz v f [2] forward voltage hyper red 1.95 2.5 v i f =20ma i r reverse current hyper red 10 ua v r =5v parameter values units power dissipation 75 mw dc forward current 30 ma peak forward current [1] 185 ma reverse voltage 5 v operating temperature -40c to +85c storage temperature -40c to +85c notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity / luminous flux: +/-15%. * luminous intensity value is traceable to cie127-2007 standards. notes: 1. wavelength: +/-1nm. 2. forward voltage: +/-0.1v. 3. wavelength value is traceable to cie127-2007 standards. 4. excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradat ion or premature failure. notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. relative humidity levels maintained between 40% and 60% in pr oduction area are recommended to avoid the build-up of static electricity ? ref jedec/jesd625-a and jedec/j-std-033.
spec no: dsap0944 rev no: v.1a date: mar/01/2017 page: 3 of 5 approved: wynec checked: allen liu drawn: w.q.zhong er p: 1203004347 hyper red APPA3010SURCK
spec no: dsap0944 rev no: v.1a date: mar/01/2017 page: 4 of 5 approved: wynec checked: allen liu drawn: w.q.zhong er p: 1203004347 APPA3010SURCK recommended soldering pattern (units : mm; tolerance: 0.1) reel dimension tape dimensions (units : mm)
spec no: dsap0944 rev no: v.1a date: mar/01/2017 page: 5 of 5 approved: wynec checked: allen liu drawn: w.q.zhong er p: 1203004347 packing & label specifications APPA3010SURCK terms and conditions for the usage of this document 1. the information included in this docum ent reflects representative usage scenarios and is intended for technical reference on ly. 2. the part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. before production usage customer should refer to the latest datasheet for the updated specifications. 3. when using the products referenced in this document, please make sure the produc t is being operated within the environmental and electrical limits specified in the dat asheet. if customer usage exceeds the spec ified limits, kingbright will not be respon sible for any subsequent issues. 4. the information in this document applies to typical usage in consumer electronics applicati ons. if customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with kingbright representative for further assistance. 5. the contents and information of this document may not be reproduced or re-transmitted without permission by kingbright. 6. all design applications should refer to kingbright application notes available at http://www.kingbrightusa.com/applicationnotes
|
